“If you are going to buy the post anchors, get the hole saw to go with it. Cut through 9 6×6 treated post with ease. Worked well. Just make sure you have a 1/2 inch drill for the chuck.”- By Douglas Price
HOLE SAW & ARBOR
Use our Hole Saw with Arbor for preparing posts for installing the Titan Wood Post Anchor. The circular cut guides the sharp-edged tube into the post. The 1-¼” saw is for the 4×4 post anchor and the 1-3/4″ saw is used with the 6×6 post anchor.
The depth of the saw is only 1-7/8″ but don’t let that fool you. The tube on the post anchor is longer and is intended to be driven down far beyond the depth of the hole saw kerf cut. Then drive the tube and base of the post anchor flush to post with a 3 lbs short handle sledge hammer.
A great all around hole saw to have in your tool belt. Use this 1-1/4” (32mm) diameter hole saw and arbor to prepare the ends of 4×4 posts for use with our Titan post anchor. Depth of cut is 1-7/8”. Also use this arbor with hole saws as large as 1-3/4″ and as small as 3/4″ diameter. You can use our 4×4 center guide to quickly and easily locate the center of your 4×4 and plunge the hole saw to a depth of 1-7/8”. Use the circular hole cut as a pilot guide for the anchor tube which is 3.5” long. Drive the tube and base flush to post with a 3 lbs mallet.
Model
HSK32
Material
Hardened steel bi-metal hole saw
Dimensions
1-1/4″ Dia x 1-7/8″ Depth of Cut (32mm x 47mm)
Recommended Uses
For preparing 4×4 post bottom for 4×4 post anchor installation
6x6
Description
A great all around hole saw to have in your tool belt. Use this 1-3/4” (44mm) diameter hole saw and arbor to prepare the ends of 6×6 posts for use with our Titan Post Anchor. Depth of cut is 1-7/8”. Also use this arbor with other hole saws as small as 3/4″ diameter by simply removing collar included with the arbor. You can use our 6×6 center guide to quickly and easily locate the center of your 6×6 and plunge the hole saw to a depth of 1-7/8”. Use the circular hole cut as a pilot guide for the anchor tube which is 4.5” long. Drive the tube and base flush to post with a 3 lbs mallet.
Model
HSK45
Material
Hardened steel bi-metal hole saw
Dimensions
1-3/4″ Dia x 1-7/8″ Depth of Cut (45mm x 47mm)
Recommended Uses
For preparing 6×6 post bottom for 6×6 post anchor installation
If you are going to buy the post anchors, get the hole saw to go with it. Cut through 9 6×6 treated post with ease. Worked well. Just make sure you have a 1/2 inch drill for the chuck.
Douglas P.
5/5
Titan hole saw
well made
Djl
WHERE TO FIND OUR PRODUCTS?
USA: We are a vendor to these dealers. Call these dealers to confirm availability.
Canada: We are a vendor to these dealers. Call these dealers to confirm availability.
Our mission has always been to deliver solutions that look great and perform to higher standards. So we try hard to remove redundant materials, to hide fasteners, and to deliver it all in a form that looks beautiful and stands out from the crowd. It is just one more way we are trying hard to help you succeed.