“I had about 5 of my neighbors just in awe of them when I was installing six of them yesterday. The hardest thing was to prep and level the ground before drilling them in. Honestly took less than 20 minutes. Went down very straight and easy even in very thick clay soil. One of the best products I have seen. 10 out of 10.”

– By Ken Bacchus, Brampton ON

DECK FOOT ANCHOR™

Now you can quickly and easily install ground anchored footings for free standing decks, sheds, ramps and more* – in minutes!

The Titan Deck Foot Anchor gives you the strength and security similar to a poured concrete footing without the labor, time and cost.

  • You are going to love it!
  • Turn a week long job into a weekend project.
  • Save money on labor, materials and time.
  • Install in the morning and build in the afternoon.

KIT includes:

  • Post Saddle Of Your Desired Size
  • Deck Plate
  • Auger Of Your Desired Length

* Don’t Need a complete kit? Check Out our Post SaddleLoad PlateAuger*

EASILY DRIVE IN OR OUT

It’s dependable Direct Drive system ensures you can drive the anchor forward or reverse for quick installation. Installs with a handheld ½” impact wrench. Turn a week-long job into a weekend project. Save money on labor, materials and time. No sledge or jackhammers or heavy machinery. Install in the morning and build in the afternoon.

*For floating or free-standing structures where freezing soil conditions exist.

TECH SPECIFICATIONS

HOW IT WORKS

Installing Footings ...Has Never Been This Easy

3 steps to install deck foot anchor

DRIVE

Using a lightweight handheld  ½” electric impact wrench and a 12mm six point socket, drive the auger deep into the soil.

TIGHTEN

Tighten the nut and compress the load plate against stop washer below the load plate.

ATTACH

Place the post saddle in the desired location. Tighten the upper nut to attach the saddle to the auger and load plate.

Deck Foot Anchor Instructions

Grab a copy of our installation guide and use it to help plan your project.

DECK FOOT ANCHOR TROUBLESHOOTING GUIDE

This guide provides users with solutions to common issues, enabling them to resolve problems independantly.

DIMENSIONS

flat-deck-foot-dimension
Deck Foot Winter

HOW DOES FROST AFFECT THE ANCHOR?

The Deck Foot Anchor™ does not heave up from the ground like a fence post that is literally popped out of the ground a little bit each year. The Deck Foot Anchor ™ remains anchored to the ground and moves with the soil as it expands up or settles down during freeze or thaw cycles.

The Deck Foot Anchor is not a frost footing and falls under Section R403.1.4.1. Exception 3(IRC)and Section 9.12.2.2.(7) (NBC). Therefore it is recommended for use with freestanding decks, unless the soil does not freeze in your area.

WHAT IS TERRA-SHIFT™

Terra-Shift refers to our unique friction release system in the bracket that protects critical post to beam connections on your deck in the event of any seasonal soil movement.

If any uneven uplift forces are imposed on your footings, posts will slide up or down independently as needed to protect and preserve the post and beam joints from separating.

TESTED TO A MINIMUM OF 19,000 POUNDS!

Independent compression load testing has confirmed that each Deck Foot Anchor can support a minimum of 19,000 pounds.

This is far more than your soil will ever support. So the Deck Foot Anchor is not the weakest link. Your soil bearing capacity is the limiting factor.

Terra Shift Technology

TERRA-SHIFT: A SHOCK ABSORBER THAT PROTECTS YOUR DECK

Watch this demonstration of how the patented Terra-Shift system works to relieve stresses that may build up during seasonal changes and threaten the integrity of your deck structure.

Regardless of the harshness of your climate, the post to beam connections supporting your structure will remain strong and sturdy.

AUGERS AVAILABLE IN 24" OR 36" LENGTHS

Use the 24″ for most applications.  Use the 36″ auger when you want more wind uplift resistance or you are building on a slope.  The auger length will make no difference how the Deck Foot will perform in frost as the above animation shows.

The deck will always be resting on the surface and will rise or descend marginally with the soil expansion and contraction.  But it will always remain securely anchored to the ground.

Framing and Bracing

LOW OR HIGH ELEVATION DECKS

GROUND LEVEL

You can build your deck with joists as low as 2″-3″ above grade if you wish. Simply hang the joists from the perimeter joist.  If you want to extend the deck beyond the footing, extend the side perimeter joists 6″-10″ and fill with blocking joists along the length.

EASILY UP TO SIX FEET

With proper bracing in both directions from 6×6 posts to beams, you can make a six-foot high freestanding deck as solid as a rock.  It’s possible to go even higher but it is not intended to support decks at a second-floor elevation.

SECURELY ANCHORED: READY FOR HIGH WINDS

Decks supported by concrete blocks that rest on the surface are susceptible to uplift in high winds and have to be secured to the ground with a webbing of cables and ground spikes.

The Titan Deck Foot Anchor™ holds your footings securely to the ground. Almost 2/3 of the United States and parts of Canada are in high wind zones. 

For maximum uplift resistance, consider using the 36″ auger.

UPLIFT

Pull out resistance (tension) from undisturbed soil varies by soil type and auger length.  If you are building a project where known uplift data is required please see our Tension Test data for sandy or clay soils based on auger length.  This is data taken from field testing by Intertek in a location in Colorado and is part of an extensive residential code compliance review program this is expected to be completed in the spring of 2022.

how-many-footings

HOW MANY FOOTINGS DO I NEED?

The Rule of Thumb is 6′-0″ apart for each footing.  This corresponds to a design load of 50 psf and tributary areas over each footing of 36 sqft.  

So the total load imposed on the soil below each footing would be a maximum of 1800 psf as the footing is just slightly larger than 1 sqft.

If you have a large deck where three or more beams are going to be used, consider adding one additional footing along the interior beam.  This is because the tributary loads of any structure are always greatest in the middle.

WILL AN AUGER WORK IN MY SOIL?

Some soil is not well suited for augers.  The soil may be full of rocks, roots or other obstructions. 

The Deck Foot Anchor™ can be retracted easily enough and there is some latitude with where to choose to install each footing. 

However, if you are unsure about your soil use a 24″ Bit Extender (or longer) with a 1″ spade bit and a cordless drill.  Try driving the bit into the ground as deep as it will go.  This will tell you right away if an auger will work in your soil.

USE OUR IMPACT SOCKETS

Our 12mm high impact six point socket is designed to grip the hexagon drive head without stripping no matter the load. 

This tiny investment can save headaches on the job site. If you use a low quality twelve point socket that does not fit as well, you are more likely to strip the drive head while under maximum load. 

WARNING: Your experience with the Deck Foot Anchor is entirely dependent on your soil type.  Rocks or roots or a weak impact wrench can prevent the auger from driving fully into the soil and an improperly sized socket can strip the driver head.  Continuous torque for an extended period of time on the auger, once it has been stopped by a rock or immobile obstruction, can destroy the auger. The footing does not provide any significant lateral load resistance and should be used for compression load applications only.

HERE IS A REAL DECK JOB

MULTI-LEVEL HOT TUB DECK

This was a large multi-level deck that really shows off the usefulness of the Titan Deck Foot Anchor™. Three separate areas. All intricately designed to wrap around a hot tub spa and create intimate areas.

The first area was off the back patio door about 3-1/2′ high. The others were lower level platforms over a gradual grade sloping away from the house.

All 24 footings were installed before lunch hour.

Another building benefit is being able to use the Titan Deck Foot Anchor™ to easily drop beams within 2″ of the grade. Try doing this with a block…

LOW SET BEAMS

You can also hang joists from beam face to beam face if you really wanted to hide all the beams of a low-level deck. That is next to impossible to do with blocks.

First, if we used concrete blocks we would have had trouble figuring out how to get the deck joist framing as low to the ground because they sit higher.

Second, the deck would just loosely sit on them. Here, each footing and post to beam connection is secured to the ground.

Third, we didn’t want to see cement blocks when you walked by the highest level deck.

WARNING: Your experience with the Deck Foot Anchor is entirely dependent on your soil type.  Rocks or roots or a weak impact wrench can prevent the auger from driving fully into the soil and an improperly sized socket can strip the driver head.  Continuous torque for an extended period of time on the auger, once it has been stopped by a rock or immobile obstruction, can destroy the auger. The footing does not provide any significant lateral load resistance and should be used for compression load applications only.

WARMING: Allow wet posts to dry and acclimate to local humidity before cutting 2×4 rails to length.  Larger (6×6) wet posts, in particular, can shrink up to ¼” and this can cause the connectors and/or the 2x4s to pull apart.  

WARRANTY

Download a full-size copy of the  Warranty.

WHAT ARE PEOPLE SAYING ABOUT US?

yotpo-logo-new
5/5

Sturdy and Reliable

I used four deck foot anchors to anchor my wood pergola. It is most definitely not going anywhere! I was impressed with the quality of the parts. We did encounter some challenges with tree roots while putting in the anchors. That took a bit of tweaking and troubleshooting, but we were able to figure it out. Very happy with the product!

Victoria S.

yotpo-logo-new
5/5

Amazing Product and Amazing Customer Service

Received the product at the vendor and inside of an hour and a half I had 7 footing installed. They are very secure and look great. Also called the company here in Canada and had a real person answer the phone within 2 rings. Questions were handled amazingly and would highly recommend this product and this company.

Jeff C.

yotpo-logo-new
5/5

Works as advertised!

Great time saver, just right for the job. Please be mindful that a six point socket is best to drive in the anchor. Made my neighbors jealous with the ease of install. My application was mainly to keep a canopy from lifting up. I have no concerns at all! These parts were on backorder for a long time during the early part of Covid but they were worth waiting for!! 

Gene P.

yotpo-logo-new
5/5

Ms.

These are amazing. I used them for an 8 x 14 foot pergola. Digging post holes wasn’t an option due to the giant old maple tree with it’s extensive root system I built the pergola under. Well… maybe was an option but I really didn’t want to dig those holes! I also have tons of rocks. Whole structure is incredibly stable. These augers are super easy to install and very forgiving if you need to pull up and move over a few inches for a hidden root. They are also very narrow so 4 of 6 went in perfect the first time. The other 2 were very simple to pull out and move a few inches over. The sliding post bracket is nice as well, allows for adjustment once the auger is set. These are very easy to install independently and save an enormous amount of time. As an added bonus I had one spare.. I’m currently using it as a tool. A bit off label but that spare anchor has seen a ton of use… I found that if I drilled it into the soil about 10 times in a 2 foot area I could loosen the soil enough to plant a tree in under an hour… despite the rocks. Very easy to hand bomb with a shovel once the soil has been loosened up!! I’m planning to add a deck behind my house next summer with these!

Erin

yotpo-logo-new
5/5

Simple AND Flexible!

I had bought these for a floating deck which I originally measured as an 8′ x 8′ deck. I bought the Titan Ground Anchor system for my footings and squared out the perimeter beams. It took me less than 2 hours to set 9 Titan anchors and square up the perimeter beams. However, once we decided to go with a 12′ x 12′ gazebo, I had to adjust the base – NO PROBLEM! I just removed 8 Titan anchors and re-installed them in their new positions! That’s how FLEXIBLE these anchors are – I would never have been able to do that with traditional footings! The Titan anchor saved my project and took minimal time to set it and forget it! This is a revolutionary product and makes your DIY deck projects so simple! I had bought them from a local deck materials supplier in Markham, Ontario CA. Tip: spend the money and buy the EXACT fitting impact-rated socket – it will save your augers and give you a much easier installation experience. 

Jazzy G.

yotpo-logo-new
5/5

Titan v. Concrete On (and in) the Ground

I’m also using concrete pilings, so have direct comparison and this footings definitely provide a robust alternative for a lot less work. I was impressed with thickness of the base plate – I was anticipating something a bit of flex that would gain stiffness from its contact w/the ground. However, it’s actually a very rigid plate on its own, then also shaped convex-downwards to have even more stiffness. Customer service has been great – from tracking orders to answering technical questions, responses have been fast and very helpful.

Matt B.

WHERE TO FIND OUR PRODUCTS?

USA: We are a vendor to these dealers.  Call these dealers to confirm availability.

Canada: We are a vendor to these dealers.  Call these dealers to confirm availability.

DEALER APPLICATION

Join Our Dealer Network

WE'RE THINKING OF YOU EVERYDAY

Our mission has always been to deliver solutions that look great and perform to higher standards. So we try hard to remove redundant materials, to hide fasteners, and to deliver it all in a form that looks beautiful and stands out from the crowd. It is just one more way we are trying hard to help you succeed.