- All
- Footings
- Post Anchor
- Balusters
- Balusters & Railing Accessories
- Connectors
- Deck Rail Connectors
- Post Skirt & Caps
- Post Skirt
- Tools & Accessories
Use our Hole Saw with Arbor for preparing posts for installing the Titan Wood Post Anchor. The circular cut guides the sharp-edged tube into the post. The 1-¼" saw is for the 4x4 post anchor and the 1-3/4" saw is used with the 6x6 post anchor.
The depth of the saw is only 1-7/8" but don't let that fool you. The tube on the post anchor is longer and is intended to be driven down far beyond the depth of the hole saw kerf cut. Then drive the tube and base of the post anchor flush to post with a 3 lbs short handle sledge hammer.
Use our Hole Saw with Arbor for preparing posts for installing the Titan Wood Post Anchor. The circular cut guides the sharp-edged tube into the post. The 1-¼" saw is for the 4x4 post anchor and the 1-3/4" saw is used with the 6x6 post anchor.
The depth of the saw is only 1-7/8" but don't let that fool you. The tube on the post anchor is longer and is intended to be driven down far beyond the depth of the hole saw kerf cut. Then drive the tube and base of the post anchor flush to post with a 3 lbs short handle sledge hammer.
| Description | A great all around hole saw to have in your tool belt. Use this 1-1/4” (32mm) diameter hole saw and arbor to prepare the ends of 4x4 posts for use with our Titan post anchor. Depth of cut is 1-7/8”. Also use this arbor with hole saws as large as 1-3/4" and as small as 3/4" diameter. You can use our 4x4 center guide to quickly and easily locate the center of your 4x4 and plunge the hole saw to a depth of 1-7/8”. Use the circular hole cut as a pilot guide for the anchor tube which is 3.5” long. Drive the tube and base flush to post with a 3 lbs mallet. |
| Model | HSK32 |
| Material | Hardened steel bi-metal hole saw |
| Dimensions | 1-1/4" Dia x 1-7/8" Depth of Cut (32mm x 47mm) |
| Recommended Uses | For preparing 4x4 post bottom for 4x4 post anchor installation |
| Description | A great all around hole saw to have in your tool belt. Use this 1-3/4” (44mm) diameter hole saw and arbor to prepare the ends of 6x6 posts for use with our Titan Post Anchor. Depth of cut is 1-7/8”. Also use this arbor with other hole saws as small as 3/4" diameter by simply removing collar included with the arbor. You can use our 6x6 center guide to quickly and easily locate the center of your 6x6 and plunge the hole saw to a depth of 1-7/8”. Use the circular hole cut as a pilot guide for the anchor tube which is 4.5” long. Drive the tube and base flush to post with a 3 lbs mallet. |
| Model | HSK45 |
| Material | Hardened steel bi-metal hole saw |
| Dimensions | 1-3/4" Dia x 1-7/8" Depth of Cut (45mm x 47mm) |
| Recommended Uses | For preparing 6x6 post bottom for 6x6 post anchor installation |
